Custom Made Harness - Small -> 2XL
Starting at:
$35.00
25mm Webbing Harness with Base Plate and 2 Straps each side connected to a D-ring with Client color selections and Size/Width selections. Otherwise not available in store or online shop.
Measurements you will need for the Harness
Step 1a - Plate Width
Measure the width you are wanting. Remember to keep 0.5->1cm free each side so it does not rub on them when they are walking.
Step 1b - Measure Width as Indicated
This diagram is a visual indication of where to measure correctly.
Step 1c - Record Width
You can now enter these into the customization section Part 1 and move to the next step.
Bottom Plate Width
We are needing the width of the plate that you are after. Please enter your selection below by selecting ONE only. The measurements will go over several options.
Bottom Plate Width Group 1
Bottom Plate Width Group 2
Section total:
$0.00
Measurements you will need for the Harness
Step 2a - Plate Length
Measure the length you are wanting, including any future growth if required.
Step 2b - Measure Length as Indicated
This diagram is a visual indication of where to measure correctly.
Step 2c - Record the Length
You can now enter these into the customization section Part 2 and move to the next step.
Bottom Plate Length
We are needing the length of the plate that you are after. Please enter your selection below by selecting ONE only. The measurements will go over several options.
Bottom Plate Length Group 1
Bottom Plate Length Group 2
Section total:
$0.00
Measurements you will need for the Harness
Step 3a - The 2 Strap Lengths
Measure the length of each around the neck and chest as indicated that you are wanting. First will be the Neck.
Step 3b - Neck Strap Length First
This diagram is a visual indication of where to measure correctly.
Step 3c - Record Neck Strap Length
You can now enter these into the customization section Part 3 and move to the next step.
Neck Point - Strap Length
We are needing the length of the straps that you are after. We add 15cm either side of your number for fitting. Please enter your selection below to the closest number. One for the Neck strap and one for the Chest strap. The measurements will go over several options.
Neck Strap Length Group 1 - 24cm-42cm
Neck Strap Length Group 2 - 44cm-62cm
Neck Strap Length Group 3 - 64cm-82cm
Neck Strap Length Group 4 - 84cm-102cm
Neck Strap Length Group 5 - 104cm-122cm
Section total:
$0.00
Measurements you will need for the Harness
Step 4a - The 2 Strap Lengths
Measure the length of each around the neck and chest as indicated. The Chest is next.
Step 4b - Chest Strap Length Next
This diagram is a visual indication of where to measure correctly.
Step 4c - Record Chest Strap Length
You can now enter these into the customization section Part 4 and move to the next step.
Chest Point - Strap Length
We are needing the length of the straps that you are after. We add 15cm either side of your number for fitting. Please enter your selection below to the closest number. One for the Neck strap and one for the Chest strap. The measurements will go over several options.
Chest Strap Length Group 1 - 24cm-42cm
Chest Strap Length Group 2 - 44cm-62cm
Chest Strap Length Group 3 - 64cm-82cm
Chest Strap Length Group 4 - 84cm-102cm
Chest Strap Length Group 5 - 104cm-122cm
Section total:
$0.00
Time to select the colors you want for the Harness
Step 5a - The Base
The Standard Base is with a Black Trim on the outside. You are able to select from Plain Colors or Patterns.
Step 5b -Make a Selection, Plain or Pattern Trim
This diagram is a visual indication of the outside color trim.
Step 5c - Record your Selection
You can now enter these into the customization section Part 6 and move to the next step.
Trim Color Base Plate
This is the customization of the trimming on the base plate so you can see the color.
Pattern Color Trim Base - Group 1
Plain Color Trim Base - Group 1
Section total:
$0.00
Time to select the Strip Color or Pattern in the middle of the Base Plate
Step 6a - The Centre Strip Color
The Standard Base is with a Black Trim on the outside. You are able to select from Plain Colors or Patterns.
Step 6b - Make a Selection, Plain or Pattern Trim
This diagram is a visual indication of the center strip color.
Step 6c - Record the Strip Color
You can now enter these into the customization section Part 6 and move to the next step.
Color Selection Strip on Base Plate
Select ONE box only for the base strip on the base plate to match trim and future straps.
Color Strip Pattern - Group 1
Color Strip Pattern - Group 2
Section total:
$0.00
Time to select the Strap Colors or Pattern for the Harness
Step 7a - Select a Color
Select a color or select a pattern for the straps on the Harness.
Step 7b - Select a Pattern
If not a color, then a Pattern selection for the harness.
Step 7c - Record your Strap Colors
You can now enter these into the customization section Part 7 and move to the next step.
Strap Color Selection
Patterns or colors
Pattern Webbing Group 1
Pattern Webbing Group 2
Section total:
$0.00
Time to select the Colors or Lockability of your Buckles for the Harness
Step 8a - Select your Color Buckle
Select the color buckle you would like to match the Harness.
Step 8b - Select you Style. Lockable or Not
The only Lockable ones come in Black.
Step 8c - Record your Buckle Colors
You can now enter these into the customization section Part 8 and move to the next step.
Buckles
Style and Color of Buckle
Color and Style
Section total:
$0.00
Time to review the Colors or Patterns plus sizing of your Harness
Step 9a
Ensure your width and length of the base plate are correct. Measure twice pay once :)
Ensure you are happy with your Base Trim, Centre Trim, Straps and Buckles
Step 9b
Once you are happy you can also view it on the Live Picture below. It simply grabs the different pieces and layers them so you can get an idea of the color scheme together.
Step 9c - Add to Cart and Pay - We start Making it.
Review Your Customization
- Configure your product to see the summary
Live Preview
